Product

Mono Extruder Machine MODEL : JNET-MONO-85P

– This specification is applied for Mono Extruder Machine. The Mono Extruder Machine are designed for producing FIBC (JUMBO BAGS).

Automatic Jumbo Bag Cutting Machine

Goods descriptions – Automatic winding, rectification, gauge length, round knife cutting, cross cutting, straight knife cutting and feeding. – PLC centralized control system, color man-machine interface, setting data, …

Plastic PP recycling machine.

Detailed Technical Specifications and Introduction of Granulation Equipment: 1. Shredder Feeding Belt Conveyor :Belt Width: 600mm Machine Body Material: Carbon Steel + Stainless Steel Belt Material: PVC with Skirt Edge Motor Power: 2.2kW Control Method: Constant Speed Operation Belt Width: 600mm 2.Single Shaft Shredder: Main Shaft Diameter: 350mm Effective Length of Main Shaft: 680mm Main Shaft Speed: 87rpm Motor Power: 45kW Hydraulic Power: 4kW Fixed Blade Quantity: 1 piece SKD11 Rotating Blade Quantity: 30 pieces SKD11 Control Method: Siemens PLC Touch Screen 3.Shredder Discharge Belt Conveyor: Belt Width: 600mm Belt Material: PVC with Skirt Edge Motor Power: 1.5kW Control Method: Constant Speed Operation 4.Granulator Feeding Belt Conveyor Belt Width: 600mm Machine Body Material: Carbon Steel + Stainless Steel Belt Material: PVC with Skirt Edge Motor Power: 2.2kW Control Method: Constant Speed Operation 5.Compactor: The knife disc high-speed cuts the material and generates heat through friction, which can remove part of the moisture, and then the material is thrown into the screw by centrifugal force. Machine Body Material: Stainless Steel Fixed Blade Quantity: 8 pieces Rotating Blade Quantity: 9 pieces Motor Power: 75kW Temperature Control Zone: 1 zone Control Method: Constant Speed Operation 6.ML100/30 Single Screw Extruder Gearbox: High torque, low noise, external connection cooling circulation system Barrel and Screw Material: 38CrMoA1A AC Motor: 90kW Screw Diameter: 100mm L/D Ratio: 28:1 Temperature Control Zone: 6 zones Heating Method: Cast aluminum electric heating Cooling Method: Automatic air cooling Control Method: Variable frequency speed regulation 7.400X320 Meshless Filter. Filtering Polyester Sewing Thread, 60 mesh Temperature Control Zone: 2 zones Screen Plate Diameter: 400X320 Hydraulic Station Motor: 3kW Control Method: Automatic pressure control by solenoid valve Automatic Slag Discharge 8. Water Ring Pellet Cutting System Including: Hot cutting die head, water ring cover, cutter holder, knife disc, knife shaft, water pump Pellet Cutting Motor Power: 1.5kW Water Pump Motor Power: 3kW Water Ring Cover Material: Stainless Steel Control Method: Variable frequency speed regulation 9.Vertical Centrifugal Dewatering Machine: Machine Body Material: Stainless Steel Motor Power: 3KW Dehumidification Power: 0.75KW Control Method: Constant Speed Operation 10.Air Feeding Hopper Hopper Material: Stainless Steel Hopper Capacity: 1.5m³ Fan Power: 3kW 11.Control Cabinet Control: "Siemens" PLC + Touch Screen Swiss "CARLO" Solid State Relays with fuse protection for heating, and heating frame wiring using nickel-plated high-temperature wires for oxidation resistance. Frequency Inverter: "Huichuan" Main circuit breaker by "Schneider Electric," while other low-voltage electrical components (miniature circuit breakers, motor circuit breakers, contactors, buttons, etc.) are all by "Schneider." Main pressure protection by pressure sensor. Provide the necessary wiring for connection between the main machine and the control cabinet.          

Model: JNSM-4020CGDY High-Speed Sewing Machine

Product Advantages: 2. All pneumatic components, including solenoids, air hoses, cylinders, triple heads, six heads connectors, filters, and dust blow guns, are supplied by Yadeke.

3. The main transmission belt is made of aerospace aluminum alloy, the transmission belt is from Ober, bearings are from NSK Japan, and the machine housing is 100% authentic.
4. The overall machine structure is based on a ball bearing frame, ensuring no rigid jams. Older machines used a support tube structure, which is prone to rigid jams. The vertical axis structure is based on synchronous belts, reducing noise and increasing transmission power.
5. The rotary motor is an imported product.
6. The machine automatically winds the yarn with a cutting knife, preventing yarn entanglement.
7. The machine table is made of 304 stainless steel, with a mirror-like surface. There are separate left and right tables for clamping the belt.
8. The guiding mechanism is designed wider, using size 15 to make it more durable and stable.
9. The needle bar is thicker (7.94mm) and of a harder type (Black Diamond), reducing thread slippage. In contrast, the common type is only 7.24mm.
10. The applied pressure on the bottom table can be adjusted on the touchscreen, enhancing the ability to work with materials up to 14mm thick and without limitations on thin materials.
11. The servo system controls the sewing loop closing operation.
12. It doesn't tangle threads, doesn't reduce speed, doesn't break threads, handles short threads well, works effectively with heavy and thick materials, provides good thread winding, and creates smooth sewing lines